Should be there, be one of the U-6's Probably the Holsett again.
Best posts made by Fitch
-
RE: 2019 SNHL Exhibition Race 2
Latest posts made by Fitch
-
RE: HydroSim Paint Scheme Dropbox
@craigmont Which link is the Complete Boat Folder?
-
RE: 2019 SNHL Exhibition Race 2
Should be there, be one of the U-6's Probably the Holsett again.
-
RE: 2019 SNHL Exhibition Season
Ok, Found an issue with my boat, If I can make it tonight, I'll be in the Holsett.
So.
Jason Fitch
U-6 Holsett Valvoline Miss Madison -
RE: 2019 SNHL Exhibition Season
Jason Fitch
U-93 Miss Statesman.I'm not sure if I've uploaded it, will look later tonight.
-
RE: Time to retire Hydromod
Ok, I'm currently doing some testing, but I am going to TRY and have Miss Madison there tonight...
Jason Fitch
U-6 Miss MadisonOh also, the Vintage boats have 3 categories, 50's, 60's and 70's Do these matter or do I have the wrong Mod?
-
RE: Font help
Thanks for the suggestions, I'd already decided on Hemi Head for my number but I found something good for the other stuff.
-
Driving Tips
Ok,
I've been running the Sim for a few weeks now and I've gotten most of it down, but I do have a couple of questions.
#1 Steering Lock - I'm running a G27 with a rotation of 540, I've been told to lower that to turn better I've been as far down as 180, but whats a good Wheel rotation rate for these boats?
#2 Canard - Up down? Watching the real guys run, they all seem to "flatten" or "raise" the Canard as they pick up speed. The Oberto seemed to be running full "flat" at Seafair, but that could just be an optical thing with the camera. Anyway, the real guys seem to be running flat at speed and then almost fully dropping the Canard in the corners. However, the sim seems to be different, I have to play with it on the straights and flatten it at turn in and then let it drop through the corner and then flatten it out again as I exit. Any tips on what the proper Canard trim should be?
#3 Corners - Simply, do I lift for the turns or not? I know the Roostertail at Detroit you have to lift for and I have to lift to hold the Buoy line in the corners, but I'm not sure of the other turns. Onboards don't seem to be of any help as it sounds like they're fully on it the whole time. Also, what kind of speeds should I expect in the turns?
I think that's it for now, I know I'll have more questions later.